Why can't Socket line and lighting line go together?
Water and electricity decoration is an important part of home decoration, which is related to the safety of electricity. We must pay attention to the wiring specification when decoration. Not long ago, an owner said that when he was decorating a new house, there was a spark after he connected the wires. He was so scared that he called the electrician to have a look. It turned out that the wires were inserted wrong. What's the matter?
It turns out that the lamp line and socket line are wrongly connected together, which will cause great security risks. In general, the lighting line and socket line in the home are handled separately.
The advantage of lamp line and socket line not together is that they do not interfere with each other. If one of them fails, it will not affect the use of the other. It is more scientific and reasonable to find the location of the problem easily when troubleshooting.
In addition, socket and lighting can not share one air switch. This is because the use of sockets at home is more frequent, the current passing through is large, and leakage and overload protection devices are needed. But the current through the lamp is relatively small, so there is no need to install leakage protection, just short-circuit protection.
If the two circuits are connected together by mistake, the lighting circuit can not be used as long as the socket trips. Moreover, the socket and lighting share the same zero line, which will increase the current flowing through the zero line when they have the same in and out current, which is very unsafe.
So the lighting line and the socket line must not be connected together. If you don't know the line very well, you can ask a professional electrician to connect the line to your home. If you have a problem, you will lose a lot. You should be careful about the safety problem! Hehui decoration escorts you